Biodegradable Plastics Research Articles

Synthesis of Novel Polymers with Biodegradability by Main-Chain Editing of Chiral Polyketones.

Although the use of biodegradable plastics is suitable for unrecoverable, single-use plastic, their high production cost and much lower variety compared to commodity plastics limit their application. In this study, we developed a new polymer with potential biodegradability, poly(ketone/ester), synthesized from propylene and carbon monoxide. Propylene and carbon monoxide are easily available at low costs from fossil resources, and they can also be derived from biomass. Using an atom insertion reaction to the main chain of the polymer, the main-chain editing of the polymer molecule proceeded with up to 89% selectivity for atom insertion over main-chain cleavage.

Overview of biodegradable polymers: synthesis, modification and application

Biodegradable polymeric represents a growing field. Owing to their wide-ranging properties, both synthetic and natural polymeric materials perform a vital and ubiquitous role in everyday life. Amended natural polymeric materials such as starch, cellulose, lignin, chitosan, cottonseed shell (CTS), and cotton gin trash (CGT) have enhanced properties, while synthetic Biodegradable polymeric materials such as poly (vinyl alcohol) (PVA), biodegradable plastics, biodegradable foams. Bioplastics are a kind of polymers able to be degraded by different microorganisms to small molecules (e.g., H2O, CO2, and CH4). Bioplastics are observed to solve waste materials and biodegradability is just a new material to be exploited at the end of its life in specific terms. They should be used for applications that require cheap methods to dispose of items after it has fulfilled their job (e.g., for food packaging, agriculture, or medical products).

Transparent Cellulose/Multi-Walled Carbon Nanotube Hybrids with Improved Ultraviolet-Shielding Properties Prepared from Cotton Textile Waste

Plastics offer many advantages and are widely used in various fields. Nevertheless, most plastics derived from petroleum are slow to degrade due to their stable polymer structure, posing serious threats to organisms and ecosystems. Thus, developing environmentally friendly and biodegradable plastics is imperative. In this study, biodegradable cellulose/multi-walled carbon nanotube (MCNT) hybrid gels and films with improved ultraviolet-shielding properties were successfully prepared using cotton textile waste as a resource. It was proven that MCNTs can be dispersed evenly in cellulose without any chemical or physical pretreatment. It was found that the contents of MCNTs had obvious effects on the structures and properties of hybrid films. Particularly, the averaged transmittance of cellulose/MCNT composite films in the range of 320–400 nm (T320–400) and 290–320 nm (T290–320) can be as low as 19.91% and 16.09%, when the content of MCNTs was 4.0%, much lower than those of pure cellulose films (T320–400: 84.12% and T290–320: 80.03%). Meanwhile, the water contact angles of the cellulose/MCNT films were increased by increasing the content of MCNTs. Most importantly, the mechanical performance of cellulose/MCNT films could be controlled by the additives of glycerol and MCNTs. The tensile strength of the cellulose/MCNT films was able to reach as high as 20.58 MPa, while the elongation at break was about 31.35%. To summarize, transparent cellulose/MCNT composites with enhanced ultraviolet-shielding properties can be manufactured successfully from low-cost cotton textile waste, which is beneficial not only in terms of environmental protection, but also the utilization of natural resources.

Biodegradable microplastics pose greater risks than conventional microplastics to soil properties, microbial community and plant growth, especially under flooded conditions

Biodegradable plastics (bio-plastics) are often viewed as viable option for mitigating plastic pollution. Nevertheless, the information regarding the potential risks of microplastics (MPs) released from bio-plastics in soil, particularly in flooded soils, is lacking. Here, our objective was to investigate the effect of polylactic acid MPs (PLA-MPs) and polyethylene MPs (PE-MPs) on soil properties, microbial community and plant growth under both non-flooded and flooded conditions. Our results demonstrated that PLA-MPs dramatically increased soil labile carbon (C) content and altered its composition and chemodiversity. The enrichment of labile C stimulated microbial N immobilization, resulting in a depletion of soil mineral nitrogen (N). This specialized environment created by PLA-MPs further filtered out specific microbial species, resulting in a low diversity and simplified microbial community. PLA-MPs caused an increase in denitrifiers (Noviherbaspirillum and Clostridium sensu stricto) and a decrease in nitrifiers (Nitrospira, MND1, and Ellin6067), potentially exacerbating the mineral N deficiency. The mineral N deficit caused by PLA-MPs inhibited wheatgrass growth. Conversely, PE-MPs had less effect on soil ecosystems, including soil properties, microbial community and wheatgrass growth. Overall, our study emphasizes that PLA-MPs cause more adverse effect on the ecosystem than PE-MPs in the short term, and that flooded conditions exacerbate and prolong these adverse effects. These results offer valuable insights for evaluating the potential threats of bio-MPs in both uplands and wetlands.

Soil microorganisms play an important role in the detrimental impact of biodegradable microplastics on plants

Biodegradable plastics were developed to mitigate environmental pollution caused by conventional plastics. Research indicates that biodegradable microplastics still have effects on plants and microorganisms as their non-biodegradable counterparts, yet the effects on vegetable crops are not well-documented. Additionally, the function of soil microorganisms affected by biodegradable microplastics on the fate of microplastics remains unverified. In this study, Brassica chinensis was cultivated in soil previously incubated for one year with low-density polyethylene (LDPE-MPs) and poly (butylene adipate-co-terephthalate) microplastics (PBAT-MPs) at 0.05 % and 2 % concentrations. High concentrations of PBAT-MPs significantly reduced the biomass to 5.83 % of the control. The abundance of Methyloversatilis, IS-44, and UTCFX1 in the rhizosphere bacterial community increased significantly in the presence of PBAT-MPs. Moreover, these microplastics significantly enhanced soil enzyme activity. Incubation tests were performed with three PBAT plastic sheets to assess the function of the altered bacterial community in the soil of control (Control-soil) and soil treated with high concentrations of PBAT-MPs (PBAT-MPs-soil). Scanning Electron Microscopy and Atomic Transfer Microscopy (SEM/ATM) results confirmed enhanced PBAT degradation in the PBAT-MPs-soil. PICRUST2 analysis revealed that pathways related to substance degradation were upregulated in the PBAT-MPs-soil. Furthermore, a higher percentage of strains with PBAT-MPs-degrading ability was found in PBAT-MPs-soil. Our results confirm that PBAT-MPs significantly inhibit the growth of vegetable crops and that soil bacterial communities affected by PBAT-MPs are instrumental in degrading them.

High melt viscosity, low yellowing, strengthened and toughened biodegradable polyglycolic acid via chain extension of aliphatic diisocyanate and epoxy oligomer

Poly(glycolic acid) (PGA) is a biodegradable plastic with excellent degradation rate, barrier properties, and heat resistance. However, its low melt viscosity and narrow processing temperature severely limit its application. To overcome these drawbacks, the aromatic diisocyanates TDI and MDI, aliphatic diisocyanate HDI, and multifunctional epoxy oligomer ADR were used as the chain extender to modify PGA. The PGA/HDI shows a faster chain extension reaction rate and significantly less yellowing than PGA/TDI or PGA/MDI. The combined use of HDI and ADR to modify PGA can produce long chain branched/crosslinked structures, resulting in a significant increase in melt viscosity, with complex viscosity two orders of magnitude higher than that of pure PGA and minimal yellowing. The T-5% of PGA/HDI/ADR is 45 °C higher than that of pure PGA, and its crystallization temperature, crystallization rate and melting temperature are significantly decreased, suggesting that it has a wider processing temperature window. Moreover, the tensile and flexural strength of PGA/HDI/ADR are 113.8 MPa and 216.8 MPa, respectively, an increase of 25% and 26% over pure PGA, while the elongation at break and impact strength increase to 9.5% and 11.6 KJ/m2, respectively, 42% and 176% higher than pure PGA.

Biodegradable film mulching increases soil microbial network complexity and decreases nitrogen-cycling gene abundance.

Biodegradable plastic films have emerged as a substitute for conventional plastic films. Nevertheless, responses of plant-associated microbiomes to the application of biodegradable film mulching at field scale have received little attention. A field experiment was conducted to assess the influence of different film mulching treatments on various microbial attributes and nitrogen (N) cycling functional genes in bulk and rhizosphere soils. Biodegradable film mulching raised the bacterial Shannon index in bulk soils but not in rhizosphere soils. Biodegradable film mulching has led to an increase in the complexity and connectivity of microbial networks, as well as an enhancement in the positive association among microorganisms owing to raised soil nutrients and increased crop biomass. In biodegradable film-treated soils, both bacterial and fungal communities were primarily influenced by stochastic processes associated with dispersal limitation. Moreover, conventional plastic film mulching increased denitrification, anammox, N fixation, and dissimilatory nitrate-reduction (DNRA) gene abundance in bulk soils. In rhizosphere soils, biodegradable film mulching reduced nitrification, denitrification, anammox, N fixation, and DNRA gene abundance. Furthermore, keystone genera (e.g., Nitrosospira, Truepera, Adhaeribacter, Opitutus, and Fusarium) were affected by edaphic variables, contributing to decreased N-cycling gene abundance in biodegradable film-treated soils. Collectively, biodegradable film mulching transformed soil microbiome assembly and functional adaptation, and soil nutrient availability and plant biomass were the critical factors influencing the microbial community. These findings present a novel perspective on the diverse impacts of biodegradable and conventional film mulching on soil microbiome and N-cycling processes.

Marine degradation and ecotoxicity of conventional, recycled and compostable plastic bags

Plastic bags are currently a major component of marine litter, causing aesthetical nuisance, and undesirable effects on marine fauna that ingest them or are entangled. Plastic litter also rises concern on the ecotoxicological effects due to the potential toxicity of the chemical additives leached in aquatic environments. Conventional plastic bags are made of polyethylene, either from first use or recycled, but but regulations restricting single-use plastics and limiting lightweight carrier bags (<50 μm thickness) have fostered the replacement of thin PE bags by compostable materials advertised as safer for the environment. In this study, we assess the degradation of commercially available plastic bags in marine conditions at two scales: aquariums (60 days) and outdoors flow-through mesocosm (120 days). Strength at break point and other tensile strength parameters were used as ecologically relevant endpoints to track mechanical degradation. Ecotoxicity has been assessed along the incubation period using the sensitive Paracentrotus lividus embryo test. Whereas PE bags did not substantially lose their mechanical properties within the 60 d aquarium exposures, compostable bags showed remarkable weight loss and tensile strength decay, some of them fragmenting in the aquarium after 3 to 4 weeks. Sediment pore water inoculum promoted a more rapid degradation of compostable bags, while nutrient addition pattern did not affect the degradation rate. Longer-term mesocosms exposures supported these findings, as well as pointed out the influence of the microbial processes on the degradation efficiency of compostable/bioplastic bags. Compostable materials, in contrast toPE, showed moderate toxicity on sea-urchin larvae, partially associated to degradation of these materials, but the environmental implications of these findings remain to be assessed. These methods proved to be useful to classify plastic materials, according to their degradability in marine conditions, in a remarkably shorter time than current standard tests and promote new materials safer for the marine fauna.

Karakteristik Arang Kulit Buah Kakao dan Arang Batang Bambu Terhadap Mutu Briket

The purpose of this research is to determine the optimum properties of biodegradable plastic made from banana weevil starch with the addition of straw cellulose as reinforcement. This research was conducted using Completely Randomized Method (CRD) with four treatments and four replications. In this study were the addition of straw cellulose with a ratio of starch and cellulose 1:0; 1:0,5 ; 1:1 and 1:1,5. Tests were carried out on strong tensile strength, elongation at break, biodegradation, swelling and water vapor transmission rate. The data obtained were analyzed statistically using analysis of variance (ANOVA). The addition of straw cellulose had a significant effect on the manufacture of biodegradable plastics. The result were biodegradable plastic increase tensile strength, decreases elongation at break, increase biodegradation and air resistance, reduces the rate of water vapor transmission. Biodegradable plastic with the best treatment is the ratio of starch starch ratio of 1 : 1.5 cellulose. The best result biodegrabable plastic has for tensile strength value of 9.56 MPa, elongation 6.8%, complete biodegradation on day 6, swelling 41.51% and WVTR 0.0156%.

Optimizing the Mulching Pattern and Nitrogen Application Rate to Improve Maize Photosynthetic Capacity, Yield, and Nitrogen Fertilizer Utilization Efficiency

Residual film pollution and excessive nitrogen fertilizer have become limiting factors for agricultural development. To investigate the feasibility of replacing conventional plastic film with biodegradable plastic film in cold and arid environments under nitrogen application conditions, field experiments were conducted from 2021 to 2022 with plastic film covering (including degradable plastic film (D) and ordinary plastic film (P)) combined with nitrogen fertilizer 0 (N0), 160 (N1), 320 (N2), and 480 (N3) kg·ha−1. The results showed no significant difference (p &gt; 0.05) in dry matter accumulation, photosynthetic gas exchange parameters, soil enzyme activity, or yield of spring maize under degradable plastic film cover compared to ordinary plastic film cover. Nitrogen fertilizer is the main factor limiting the growth of spring maize. The above-ground and root biomass showed a trend of increasing and then decreasing with the increase in nitrogen application level. Increasing nitrogen fertilizer can also improve the photosynthetic gas exchange parameters of leaves, maintain soil enzyme activity, and reduce soil pH. Under the nitrogen application level of N2, the yield of degradable plastic film and ordinary plastic film coverage increased by 3.74~42.50% and 2.05~40.02%, respectively. At the same time, it can also improve water use efficiency and irrigation water use efficiency, but it will reduce nitrogen fertilizer partial productivity and nitrogen fertilizer agronomic use efficiency. Using multiple indicators to evaluate the effect of plastic film mulching combined with nitrogen fertilizer on the comprehensive growth of spring maize, it was found that the DN2 treatment had the best complete growth of maize, which was the best model for achieving stable yield and income increase and green development of spring maize in cold and cool irrigation areas.

Inclusion of Pseudomonas fluorescens into soil-like fraction from municipal solid waste management park to enhance plastic biodegradation.

Single-use facial masks which are predominantly made out of polypropylene is being used and littered in large quantities during post COVID-19 situation. Extensive researches on bioremediation of plastic pollution on soil led to the identification of numerous plastic degrading microorganisms. These organisms assimilate plastic polymers as their carbon source for synthesizing energy. Pseudomonas fluorescens (PF) is one among such microorganism which is being identified to biodegrade plastic polymers in controlled environment. The natural biodegradation of facial mask in soil-like fraction collected from municipal waste management site, bioaugmentation of the degradation process with Pseudomonas fluorescens, biostimulation of the soil with carbonless nutritional supplements and combined bioaugmentation with biostimulation process were studied in the present work. The study has been conducted both in controlled and in natural condition for a period of 12months. The efficiency of the degradation was verified through FTIR analyses using carbonyl index, bond energy change, Loss in ignition (LOI) measurement along with CHNS analyses of residual substances. The analysis of results reported that carbonyl index (in terms of transmittance) was reduced to 46% of the control batch through the inclusion of PF in natural condition. The bioaugmented batch maintained in natural condition showed 33% reduction of LOI with respect to the control batch. The unburnt carbon content of the residual matter obtained from the furnace were analysed using CHNS analyser and indicated the lowest carbon content in the same bioaugmented batch. In this study, an attempt is made to verify the feasibility of enhancing biodegradation of single-use facial mask by bioaugmentation of soil-like fraction available in solid waste management park with Pseudomonas fluorescens under natural condition. CHNS and FTIR analysis assures the biodegradation of plastic waste in the soil-like fraction using Pseudomonas fluorescens under both controlled and natural environmental condition.

Enzyme modified biodegradable plastic preparation and performance in anaerobic co-digestion with food waste

A modified biodegradable plastic (PLA/PBAT) was developed by through covalent bonding with proteinase K, porcine pancreatic lipase, or amylase, and was then investigated in anaerobic co-digestion mixed with food waste. Fluorescence microscope validated that enzymes could remain stable in modified the plastic, even after co-digestion. The results of thermophilic anaerobic co-digestion showed that, degradation of the plastic modified with Proteinase K increased from 5.21 ± 0.63 % to 29.70 ± 1.86 % within 30 days compare to blank. Additionally, it was observed that the cumulative methane production increased from 240.9 ± 0.5 to 265.4 ± 1.8 mL/gVS, and the methane production cycle was shortened from 24 to 20 days. Interestingly, the kinetic model suggested that the modified the plastic promoted the overall hydrolysis progression of anaerobic co-digestion, possibly as a result of the enhanced activities of Bacteroidota and Thermotogota. In conclusion, under anaerobic co-digestion, the modified the plastic not only achieved effective degradation but also facilitated the co-digestion process.

Correction to: Green Williamson enhancement of the hydrophobic properties of cellulose fibers: thermodynamic study and application to elaborate rosemary essential oil (REO) biodegradable plastic coacervates

Correction to: Green Williamson enhancement of the hydrophobic properties of cellulose fibers: thermodynamic study and application to elaborate rosemary essential oil (REO) biodegradable plastic coacervates

Anthropogenic and biological activities elevate microplastics pollution in headwater ecosystem of Yangtze tributaries in Hindu Kush-Himalayan region

Microplastic (MP) pollution is widely spread in oceans, freshwater, and terrestrial environments but MPs in mountainous headwater ecosystem are rarely reported. This study focuses on the headwater of Yangtze tributaries of the Hindu Kush-Himalayan (HKH) region. Five streams at elevations of 900 to 3300 m were selected to investigate the distribution of MPs in water and sediments across altitudes. MPs were found in all water and sediment samples from top stream zone nearly in absence of anthropogenic activity, low anthropogenic zone, and high anthropogenic zone, increased from 12–54, 81–185 to 334–847 items/L, and 2–35, 26–84 to 124–428 items/kg, respectively. This elevation-dependent MP distribution indicated that as elevation decreased, anthropogenic activities intensified and increased MPs input and their abundance, size, and diversity. Notably, hydraulic projects, such as damming, were identified as potential barriers to the migration of MPs downstream. Microbiome analyses revealed the presence of bacterial genes associated with plastic biodegradation in all sediment samples. The study indicates that Shangri-la mountainous streams have been polluted with MPs for years with potential risk of generation of nano-sized particles via natural fragmentation and biodegradation, and thus raises concern on MPs pollution in headwaters streams in mountainous regions.

Structural characteristics of organics released from sludge pretreatment and their performance in the synthesis of biomass plastics

The conversion of organics from sludge into high-value added products is essential for achieving circular economy and sustainable development in wastewater treatment processes. Currently, research focuses on promoting the release of organics from sludge, but there is a lack of in-depth understanding of the properties and structures of the released organics. To find out a suitable sludge pretreatment method (ultrasound, alkaline, thermal, ultrasound-alkaline, alkaline-thermal hydrolysis) for biodegradable plastic synthesis, the composition, properties and structures of the released organics from sludge were studied. Alkaline treatment (pH 12) resulted in the highest surface charge with Zeta potential of –23.53 mV. The release concentration and the radius of rotation (17.79 nm) of proteins were maximized after pH 12 + 150 °C pretreatment. Ultrasound treatment disrupted the extracellular polymeric substances of sludge, releasing organics with the highest thermal stability and hydrophobicity indices (20,313). Simultaneously, β-sheets was the main secondary structure of proteins. Random coils were the main proteins secondary structure after the other pretreatments instead. Meanwhile, small-angle scattering calculations showed that the released proteins tended to be discoidal for all pretreatment methods. In addition to proteins, polysaccharides, and humic acids, small organic compounds were also produced, such as amino acids (D-alanine), aromatic compounds (pyridine), alcohols, sugars (pyranose), fatty acids (oleic and palmitic), small molecule acids (acetic), etc. Furthermore, pretreatment with pH 12 + 150 °C was more efficient for the whole process of sludge synthesis into plastics. Correlation analysis shows that the radius of rotation of proteins is the main factor affecting the tensile strength and elongation at break of synthetic plastics. This study conducted an in-depth analysis of the structure and properties of organics after different pretreatments and provided a new pathway for the resource utilization of sludge through the synthesis of plastics using sludge organics.

Chemical, Mechanical, and Wettability Properties of Bioplastic Material from Manihot esculenta Cassava–Chitosan Blends as Plastic Alternative

AbstractThe extensive use and disposal of various petroleum‐derived plastics has become a major cause of environmental pollution. The urgent need for sustainable materials to address plastic waste have resulted in the production of biodegradable plastics. In this study, a biodegradable plastic film is produced by incorporating chitosan with starch from Malaysian cassava (Manihot esculenta), utilizing the multihydroxyl properties of cassava starch. The results show that the addition of chitosan as a filler in cassava starch improves the physicochemical properties of the material, producing a bioplastic film with high compressive strength and resistance to water molecules. The contact angle of the developed biopolymer has been improved – from θ = 67.4° to θ = 97.8° – with the addition of the –NH functional group in the molecule, as confirmed by attenuated total reflectance Fourier‐transform infrared spectroscopy (v = 1555 cm−1). The tensile strength of bioplastic increases with chitosan content, proving its greater rigidity compared to bioplastic without chitosan. Additionally, the fastest biodegradation rate (9 days) occurs in the composition with high amounts of cassava in a ratio of 6:4 (cassava:chitosan). The bioplastic produced in this study readily decomposes in the environment, making it more sustainable, eco‐friendlier, and providing an alternative to mitigate the use of single‐use thermoplastics.

Production of Biomass-Derived p-Hydroxybenzamide: Synthesis of p-Aminophenol and Paracetamol.

As we work to transition the modern society that is based on non-renewable chemical feedstocks to a post-modern society built around renewable sources of energy, fuels, and chemicals, there is a need to identify the renewable resources and processes for converting them to platform chemicals. Herein, we explore a strategy for utilizing the p-hydroxybenzoate in biomass feedstocks (e. g., poplar and palm trees) and converting it into a portfolio of commodity chemicals. The targeted bio-derived product in the first processing stage is p-hydroxybenzamide produced from p-hydroxybenzoate esters found in the plant. In the second stage a continuous reaction process converts the p-hydroxybenzamide to p-aminophenol via the Hofmann rearrangement and recovers the unreacted p-hydroxybenzamide. In the third stage the p-aminophenol can be acetylated to form paracetamol, which is readily isolated by liquid/liquid extraction at >95 % purity and an overall p-hydroxybenzamide-to-paracetamol process yield of ~90 %. We explore how utilization of protecting groups alters the challenges in this process and expands the portfolio of possible products to include p-(methoxymethoxy)aniline and N-acetyl-p-(methoxymethoxy)aniline. These target compounds could become value-added renewably-sourced platform chemicals that could be used to produce biodegradable plastics, pigments, and pharmaceuticals.

Preparation of Sustainable Biobased Compounds of Pla/pbat/pbs;study on Processability there of

As a result of the overuse of conventional plastic products in daily applications by human being and as per data available only 9-10% is recycles out of whatever is produces to the date, compostable plastics such as poly (lactic acid) (PLA) and poly (butylene adipate-co-terephthalate) (PBAT) have been extensively uses in many applications as an alternative to conventional plastics due to its biologically degradable properties. These plastics offer the circularity of the carbon cycle. However, each of them has advantages and disadvantages. PLA and PBAT are the polymers on which several researches have been done. Compounds of these two polymers have been prepares with and without chain extenders and properties have been studies. Now a days many compostable and biodegradable polymers have been synthesised, irrespective of its monomer root, whether naturally available or fossil bases. One of the newly developed polymer polybutylene succinate (PBS) has also gains the attention of manufacturers due to its unique properties. The ternary blend of PLA/PBAT/PBS are therefore very interesting in terms of phase morphology and their physical properties while offering compostable practices. In this work, we have prepared different blends of PLA/PBAT/PBS with and without use of chain extenders and calcium carbonate as a filler. Study has been done on blown film extrusion machine to evaluate processability.

Polyethylene and sulfa antibiotic remediation in soil using a multifunctional degrading bacterium

To obtain a multifunctional bacterium that can effectively degrade polyethylene (PE) and sulfonamide antibiotics (SAs), PE and SAs were selected as the primary research objects. Multifunctional degrading bacteria were isolated and screened from an environment in which plastics and antibiotics have existed for a long time. An efficient degrading strain, Raoultella sp., was screened by measuring the degradation performance of PE and SAs. We analyzed the changes in the microbial community of indigenous bacteria using 16S rRNA. After 60 d of degradation at 28 °C, the Raoultella strain to PE degradation rate was 4.20 %. The SA degradation rates were 96 % (sulfonathiazole, (ST)), 86 % (sulfamerazine, (SM)), 72 % (sulfamethazine, (SM2)) and 64 % (sulfamethoxazole, (SMX)), respectively. This bacterium increases the surface roughness of PE plastic films and produces numerous gullies, pits, and folds. In addition, after 60 d, the contact angle of the plastic film decreased from 92.965° to 70.205°, indicating a decrease in hydrophobicity. High-throughput sequencing analysis of the degrading bacteria revealed that the Raoultella strain encodes enzymes involved in PE and SA degradation. The results of this study not only provide a theoretical basis for further study of the degradation mechanism of multifunctional and efficient degrading bacteria but also provide potential strain resources for the biodegradation of waste plastics and antibiotics in the environment.

Characterization of Ralstonia insidiosa C1 isolated from Alpine regions: Capability in polyhydroxyalkanoates degradation and production

This study ventures into the exploration of potential poly-3-hydroxybutyrate (PHB) degradation in alpine environments. PHB-degrading bacteria were identified in both campus soil, representing a residential area, and Mt. Kurodake soil, an alpine region in Hokkaido, Japan. Next-generation sequencing analysis indicated that the campus soil exhibited higher microbial diversity, while Ralstonia insidiosa C1, isolated from Mt. Kurodake soil, displayed the highest proficiency in PHB degradation. R. insidiosa C1 efficiently degraded up to 3% (w/v) of PHB and various films composed of other biopolymers at 14 °C. This bacterium synthesized homopolymers using substrates such as 3-hydroxybutyric acid, sugars, and acetic acid, while also produced copolymers using a mixture of fatty acids. The analysis results confirmed that the biopolymer synthesized by strain C1 using glucose was PHB, with physical properties comparable to commercial products. The unique capabilities of R. insidiosa C1, encompassing both the production and degradation of bioplastics, highlight its potential to establish a novel material circulation model.